東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
instant adhesive
Return to Previous Page
High viscosity instant adhesive based on ethyl cyanoacrylate. Designed for bonding irregular surfaces of plastic and rubber. The slow-setting time allows adjustment of parts during assembly.
High viscosity instant adhesive based on ethyl cyanoacrylate. Designed for bonding plastic and rubber together or with metal. High viscosity allows to fill large gaps. The slow fixture time allows adjustment of parts during assembly.
Super fast instant adhesive on basis of ethyl cyanoacrylate. Low viscosity, designed for fast bonding of EPDM, foam rubber, difficult to bond rubber, soft/plastic.
Super fast instant adhesive on basis of ethyl cyanoacrylate. Low viscosity, designed for fast bonding of EPDM, foam rubber; difficult to bond rubber, soft plastic.
Surface insensitive low viscosity instant adhesive on basis of ethyl cyanoacrylate. Very fast cure, even under low humidity conditions, on difficult to bond substrates, on porous and acidic surfaces as leather, wood, paper, carton, foamed rubber, EPDM.
General purpose, surface insensitive medium viscosity instant adhesive based on ethyl cyanoacrylate. Insensitive to acidic surfaces, it is recommended for bonding of leather, wood and metals. Proven temperature strength up to +120°C with peaks for short times up to +150°C. NSF registered as acceptable for use as an instant adhesive (category P1) in and around food processing area. Registration No.154017.
Instant adhesive based on ethyl cyanoacrylate. General purpose, medium viscosity and acidic surfaces insensitive, it will rapidly bond also leather, wood and metals. Temperature resistant up to +100°C, with peaks up to +120°C for a short time.
Loxeal ISTANT 47 is a highly thixotropic ethyl cyanoacrylate adhesive, suitable for bonding of rubber and plastics together or on a metal substrate. Non-drip, non-sag gel, suitable for use on vertical surfaces. The high viscosity formulation and the delayed fixture time allow large gaps filling and parts repositioning. It provides proven temperature resistance up to +120°C with peaks up to +150°C for short times. NSF registered as acceptable for use as an instant adhesive (category P1) in and around food processing area. Registration No.154016.
Instant adhesive on basis of alcoxy-ethyl cyanoacrylate. Low odour not irritating, non blooming effect for appearance sensitive assemblies. Especially suitable to be used in non ventilated or closed areas. Delayed setting time allows adjustment of parts during assembly.
Instant adhesive on basis of alcoxy-ethyl cyanoacrylate. Low odour not irritating, non blooming effect for appearance sensitive assemblies. Especially suitable to be used in non ventilated or closed areas. Delayed setting time allows adjustment of parts during assembly
Rubber toughened low viscosity Ethil-Cyanoacrylate adhesive with increased flexibility and impact resistance. Suitable for bonding rubbers and metals. Curing time is designed to allow right positioning of the pieces before assembly. Good temperature resistance up to 120°C.
Rubber toughened low viscosity Ethil-Cyanoacrylate adhesive with increased flexibility and impact resistance. Suitable for bonding rubbers and metals. Curing time is designed to allow right positioning of the pieces before assembly. Good temperature resistance up to 120°C.
Showing 1–12 of 13 results
