東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
shock resistant
Return to Previous Page
Anaerobic sealant for thread connections allowing easy dismantling of parts. DIN-DVGW approved for gas (Reg. nr. NG 5146AT0263). Upon curing will give an elastic film to replace yarn, P.T.F.E. tapes, and solid gaskets for the sealing of gas, air, water, LPG, oils, hydrocarbons and many chemicals. Easy to dismantle. Shocks and vibrations resistant, it will keep unaffected properties of sealing in the range of temperature from -55°C to +180°C.
Anaerobic adhesive for sealing of metal thread pipe joints. Suitable for gas, LP gas, compressed air, gasoline and oil, industrial fluids, CFC, water and several chemicals. Low friction coefficient will assure easy assembly. Thixotropic property prevents migration from thread of the sealant before or during curing. It replaces P.T.F.E. tape and yarn. Cured product provides elastic film. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55 to +150°C. Easy dismantling is assured even after years.
Approvals for natural gas and LP gas in vapour state.
Europe: approved to EN751-1 by DIN-DVGW NG 5146AR0574 from -20°C to +150° C up to 2” pipe size.
Australia: approved by AGA n.5047 up to 5 bar and 2” pipe size.
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives elastic cured films. To seal against gases, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents sealant migration before or during curing. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
Anaerobic curing adhesive for sealing of metal thread joints only.
- Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association - Approval No. 5048) for working pressure up to 20 Bars
- Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E)
- WRAS listed for contact with wholesome (potable) water, approval number 1310513
- Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00)
- NSF registered in cat. P1(n. 141234) as acceptable for use as a sealant in and around food processing area
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives flexible cured films.
To seal against gases, water, LPG, hydrocarbons, oils and other chemicals.
Thixotropic property prevents migration of the sealant before or during curing.
Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
Medium low viscosity, fast curing, high strength Ultra Violet curing adhesive.
Excellent optical clear over time, superior resistance to shock and vibrations.
Specially designed for bonding float glass to glass in the manufacturing of glass and crystal furniture.
Cleaning of joined parts from excess of adhesive after first UV exposure (5-10 seconds) is possible.
Fast curing, elastic, shock resistant, Ultra Violet curing adhesive.
Specially designed for glass to plastic and metallized plastics (ABS) or glass to metal bonding.
It is ideal for bonding of decorative parts, bonbonnières and furnishing accessories thanks to its good optical clarity.
Showing all 7 results
