東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
Gasketing
Return to Previous Page
Gasketing
Gasketing anaerobic adhesive seals flat mating surfaces and joins flanges on pumps, gearboxes and differential housings. It replaces preformed gaskets and allows contact between metal parts forming a seal which is not prone to creep or relaxation. It forms a flexible and / or elastic gasket resistant to vibration, heat, oil and other industrial fluids. Parts can be disassembled using normal tools.
Thixotropic permanent plastic sealant for use on threaded and flanged joints. It does not not harden in time and joints can be easily dismounted.
Seals against gas, LPG, water, gasoline, oils. Can be used in combination with preformed gaskets or alone for gap joints less than 0,1 mm. Resistant to vibrations, thermal shocks, keeps sealing properties within a temperature range of –50 / + 120°C. Prevents from surfaces corrosion.
Approved by Volkswagen for use in motor parts assembly (Ref. AKD 454300).
Solvent based rubber composition. For sealing flange joints of pumps, gearboxes, motor flanges and threaded pipes joints. Replaces preformed gaskets and PTFE tapes. Forms an elastic film highly resistant to gasoline, fuels, oils, natural gas and LP gas, industrial fuids, vibration, ageing and temperature up to +120°C. Permits disassembly of assembled parts after years.
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives elastic cured films. To seal against gases, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents sealant migration before or during curing. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives flexible cured films.
To seal against gases, water, LPG, hydrocarbons, oils and other chemicals.
Thixotropic property prevents migration of the sealant before or during curing.
Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
One component moisture curing acetic silicone sealant by reaction. Suitable for sealing gear boxes, pumps, motors and compressors flanges, hot fluid pipes. Provides an extremely flexible gasket between surfaces and resists to vibrations, thermal shocks, water, gas, LPG, oils and several chemicals. Keeps its sealing properties within temperatures of - 60° and + 250°C with peaks up to 300 °C. Sealed parts can be disassembled using normal tools.
One component sealing adhesive based on MS polymers. It’s odourless, neutral and free of isocyanates. It cures with moisture producing a tough gum-like seal. Useful to seal glass structures and surfaces, glaze, glazed metal panels, epoxy, polystyrene foam, PVC, steel, anodised aluminium and machined wood. Not suitable for PE, PP, PTFE, bituminous surfaces applications, for underwater application and expansion joints. Not to be painted with alkyl resin colours.
Showing all 6 results
