東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
HIGH TEMPERATURE RESISTANT
Return to Previous Page
Solvent based rubber composition. For sealing flange joints of pumps, gearboxes, motor flanges and threaded pipes joints. Replaces preformed gaskets and PTFE tapes. Forms an elastic film highly resistant to gasoline, fuels, oils, natural gas and LP gas, industrial fuids, vibration, ageing and temperature up to +120°C. Permits disassembly of assembled parts after years.
Loxeal 4429 is a toughened, semi-flexible, high-temperature resistant two-component epoxy resin. Especially developed for composites bonding, it provides good adhesion on various substrates as wood, metal, ceramics and many types of plastics. Designed to be nonsag for ease of use on vertical surfaces and in wide gaps. Mixing ratio 2:1 by volume. It provides a strong adhesion with high peel, cut and shear strength up to +120°C temperature with peaks at +140°C.
Loxeal 4807 is a two-components adhesive based on modified epoxy resin for flexible bonding and sealing applications. It fully adheres to plastics like PA, ABS, PC, PET, PMMA, PI, metals ceramics and composites. After full curing the adhesive looks soft and flexible. It provides high temperature resistance up to +120° with peaks to +150°C. Suitable for bonding and sealing glass fiber, metal frames in white appliances production (dishwashers, washing machine), and in automotive (lighting).
Two-part adhesive based on modified epoxy resin for flexible bonding and sealing applications. Specifically designed when self-extinguishing and thermal conductivity properties are required, it fully adheres to plastics like PA, ABS, PC, PET, PMMA, PI, metals, ceramics and composites. After full curing the adhesive looks tough and flexible and provides high peeling strength and temperature resistance up to +120°C with peaks to +150°C.
Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types that require to be dismantled. Suitable to be used on oily surfaces. Highly resistant to heat, corrosion, vibrations, water, gas, oils, hydrocarand many chemicals. Proven unscrewing resistance at +200°C.
Approved as gas-tight sealant for threaded fittings according to the European norm EN 751-1 (DVGW nr. NG-5146AU0399 and GAZ DE FRANCE).
Approved for potable water (TZW - DVGW). It keeps sealing properties unchanged between -55°C/+200°C and up to +250°C for short times.
Showing all 5 results
