東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
activator
Return to Previous Page
It cleans, degreases parts and speeds up anaerobic adhesives and sealants fixture time. Curing effect is obtained in 20 - 120 seconds depending on type of adhesive, gap between parts and room temperature; wait for solvent evaporation before assembling parts. It can be used either on flange or threaded joints; its use might reduce final mechanical strength. The Activator is applied on one surface and let to dry for a few seconds.
Solvent free Activator to set up polymerisation of acrylic adhesives. Good polymerisation effects on ferrites, metals and ceramics. Fixture time about 1-2 minutes.
Solvent free Activator to speed up the setting time of anaerobic adhesives and sealants. Curing effect is obtained in 20 - 120 seconds depending from type of adhesive, gap between parts and room temperature. Apply the Activator to one surface and the anaerobic Adhesive to the other one. As it is solvent free there is no need to wait before assembling; it’s not harmful. It can be used either on flange or threaded joints; its use might cause a lowering of final mechanical strength.
To be used with acrylic adhesives and with anaerobics. Apply the Adhesive on one part and the Activator on the other; assemble parts and wait few minutes to achieve fixing.
Cleans, degreases parts and speeds up the setting time of cyanoacrylate adhesives. Curing effect is obtained in 1 - 4 seconds depending from type of adhesive, gap between parts and surfaces composition. The Activator is applied on one surface and let to dry for a few seconds
Solvent based treatment for bonding of polyolefin (polyethylene, polypropylene), thermoplastic rubbers, EPDM, PTFE, silicones and other difficult to bond materials. Polyolefin Primer is recommended to be used with Loxeal 34 Instant Adhesive.
Showing all 6 results
