Multipurpose, thixotropic transparent and flexible structural adhesive, fast setting time. It is designed to be non-sagging for ease of use on vertical surfaces. Recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC). Not suitable for soft materials, polyethylene, polypropylene and PTFE. resistance to water, gasoline and oils.
2-component no-mixing fast curing structural adhesive to be used with its specific Loxeal Activator for bondng metals, plastics, ceramics, woods. No-mixing required, apply Adhesive on one part and Activator on the other, assemble and press parts; fixing is achieved within few minutes. It provides high impact resistance, good peeling and tensile strength, best resistance against gasoline, lubricants, water, heat resistant up to 120°C.
Self-levelling two-part adhesive based on modified epoxy resin for flexible bonding and sealing applications. It fully adheres to plastics like PA, ABS, PC, PET, PMMA, PI, metals, ceramics and composites. Temperature resistance up to +120°C with peaks to +150°C.
Chemiseal 4X248 is UV-rays curing resin that is mainly consisting of urethance acrylic based resin and used for bonding. This product is an strong adhesive that is cured rapidly under irratiation of UV-rays of 300-400nm.
Chemiseal U-1546B is UV-rays curing resin that is mainly consisting of urethance acrylic based resin and used for bonding. This product is an strong adhesive that is cured rapidly under irratiation of UV-rays of 300-400nm.
High viscosity instant adhesive based on ethyl cyanoacrylate. Designed for bonding plastic and rubber together or with metal. High viscosity allows to fill large gaps. The slow fixture time allows adjustment of parts during assembly.
Loxeal ISTANT 47 is a highly thixotropic ethyl cyanoacrylate adhesive, suitable for bonding of rubber and plastics together or on a metal substrate. Non-drip, non-sag gel, suitable for use on vertical surfaces. The high viscosity formulation and the delayed fixture time allow large gaps filling and parts repositioning. It provides proven temperature resistance up to +120°C with peaks up to +150°C for short times. NSF registered as acceptable for use as an instant adhesive (category P1) in and around food processing area. Registration No.154016.