東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
high viscosity
Return to Previous Page
Anaerobic adhesive specific for high mechanical strength on yellow brass, to seal threaded joints and to fix cylindrical couplings. It keeps sealing properties up to +250°C. It’s highly resistant to thermal shocks, vibrations, chemical agents and aging. Its high viscosity allows a great handling tolerance.
Very high temperature (+230° C) resistant, high strength anaerobic adhesive for locking and sealing thread connections and fitted parts. High viscosity and thixotropic effect allow larger tolerances. Highly resistant to corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.
DIN DVGW approved thread sealant for gas (according to DIN EN 751-1 Reg. Nr. NG - 5146AT0264).
Very high temperature (+ 230°C) resistant, high strength anaerobic adhesive for locking and sealing thread connections and fitted parts. High viscosity and thixotropic effect allow larger tolerances. Highly resistant to corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.
DIN DVGW approved thread sealant for gas (according to DIN EN 751-1 Reg. Nr. NG – 5146BQ0496).
A high viscosity gap filling silver paste used between machinery parts to repair worn areas and restore correct fits. It repairs worn shaft and housing, bearing spinouts, wallowed keyways and splines, threaded parts. Highly resistant to heat, vibrations, corrosion, water, gas, oil hydrocarbons many chemicals.
High viscosity instant adhesive based on ethyl cyanoacrylate. Designed for bonding irregular surfaces of plastic and rubber. The slow-setting time allows adjustment of parts during assembly.
High viscosity instant adhesive based on ethyl cyanoacrylate. Designed for bonding plastic and rubber together or with metal. High viscosity allows to fill large gaps. The slow fixture time allows adjustment of parts during assembly.
Loxeal ISTANT 47 is a highly thixotropic ethyl cyanoacrylate adhesive, suitable for bonding of rubber and plastics together or on a metal substrate. Non-drip, non-sag gel, suitable for use on vertical surfaces. The high viscosity formulation and the delayed fixture time allow large gaps filling and parts repositioning. It provides proven temperature resistance up to +120°C with peaks up to +150°C for short times. NSF registered as acceptable for use as an instant adhesive (category P1) in and around food processing area. Registration No.154016.
Instant adhesive on basis of alcoxy-ethyl cyanoacrylate. Low odour not irritating, non blooming effect for appearance sensitive assemblies. Especially suitable to be used in non ventilated or closed areas. Delayed setting time allows adjustment of parts during assembly
General purpose high viscosity Ethil-Cyanoacrylate adhesive with superior peel and impact resistance. Suitable for bonding rubbers, metals and plastics.
Showing all 9 results
