Thixotropic permanent plastic sealant for use on threaded and flanged joints. It does not not harden in time and joints can be easily dismounted.
Seals against gas, LPG, water, gasoline, oils. Can be used in combination with preformed gaskets or alone for gap joints less than 0,1 mm. Resistant to vibrations, thermal shocks, keeps sealing properties within a temperature range of –50 / + 120°C. Prevents from surfaces corrosion.
Approved by Volkswagen for use in motor parts assembly (Ref. AKD 454300).
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives elastic cured films. To seal against gases, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents sealant migration before or during curing. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
Anaerobic curing adhesive for sealing of metal thread joints only.
Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association - Approval No. 5048) for working pressure up to 20 Bars
Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E)
WRAS listed for contact with wholesome (potable) water, approval number 1310513
Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00)
NSF registered in cat. P1(n. 141234) as acceptable for use as a sealant in and around food processing area
It replaces PTFE tape and yarn and gives instant sealing against moderate pressure. It seals against gas, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents migration of sealant from thread before or during curing. Shock and vibrations resistant, sealing properties unaffected over the temperature range from -55°C to +150°C.
One component moisture curing acetic silicone sealant by reaction. Suitable for sealing gear boxes, pumps, motors and compressors flanges, hot fluid pipes. Provides an extremely flexible gasket between surfaces and resists to vibrations, thermal shocks, water, gas, LPG, oils and several chemicals. Keeps its sealing properties within temperatures of - 60° and + 250°C with peaks up to 300 °C. Sealed parts can be disassembled using normal tools.
Fast curing anaerobic adhesive for metals, with high mechanical resistance, designed to seal and lock threaded joints and cylindrical couplings.
Provides high resistance to temperature, vibration, chemical agents and aging. Highly resistant to unscrewing on yellow brass, nickel-plated and chromed fittings. Approved as threaded joints sealant for gas pipes under EN 751-1 (DIN DVGW nr. NG-5146BQ0134). Suitable for use with hot and cold potable water up to +85°C (WRAS-approved material BS6920:2000). Positively tested by NSF Laboratoires, Michigan, USA, according to ANSI 61 for potable water contact.Keeps the sealing property until the temperature of +200° C for short periods.