東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
corrosion resistant
Return to Previous Page
Low strength anaerobic adhesive for thread locking of nuts, bolts and screws of all types that require to be easily dismantled. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbon many chemicals.
Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types requiring to be dismantled. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals.
Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types that require to be dismantled. Suitable to be used on oily surfaces. Highly resistant to heat, corrosion, vibrations, water, gas, oils, hydrocarand many chemicals. Proven unscrewing resistance at +200°C.
Approved as gas-tight sealant for threaded fittings according to the European norm EN 751-1 (DVGW nr. NG-5146AU0399 and GAZ DE FRANCE).
Approved for potable water (TZW - DVGW). It keeps sealing properties unchanged between -55°C/+200°C and up to +250°C for short times.
Low viscosity and high capillary action for locking and sealing threaded fasteners and close fittings parts after assembly, also to penetrate and seal metal porosity in moulds and in castings. Medium to high strength locking. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals.
Fast curing high strength anaerobic adhesive for locking and sealing threads and retaining of cylindrical components.Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals. Approved for Gas (Gaz de France). Drinking water Certification. France: according to Eurofin Expertises Environmentales texts. (Dossier n° 14 CLP NY 005) product is in compliance with white lists - Ministère chargé de la santé DGS/VS4 n° 99/217 du 12 avril 1999 et DGS/VS4 n° 2000/232 du 27 avril 2000 (ACS)
Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical components. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals. Approved as thread sealant with gaseous oxygen up to 20 bar at + 60°C (BAM Ref N° II.1/46 363).
High strength anaerobic adhesive for locking and sealing of studs, nuts, bolts and threaded fasteners not requiring dismantling. It can be used on all metals, either in free or forced matings. It provides temperature resistance up to +200°C and high unscrewing strength. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbon many chemicals.
High strength anaerobic adhesive for locking and sealing of studs, nuts, bolts and threaded fasteners not requiring dismantling. It can be used on all metals either on free or forced matings. It provides high resistance to heat, corrosion, vibrations, water, gases, oils, hydrocarbon and many chemicals.
Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical parts. It allows larger machining tolerances. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals. Approved for gas - Gaz de France.
Very fast curing, high strength anaerobic adhesive for locking threads and retaining od cylindrical components. It allows large machining tolerances. Highly resistant to corrosion, vibrations, many chemicals and ageing.
Very high temperature (+230° C) resistant, high strength anaerobic adhesive for locking and sealing thread connections and fitted parts. High viscosity and thixotropic effect allow larger tolerances. Highly resistant to corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.
DIN DVGW approved thread sealant for gas (according to DIN EN 751-1 Reg. Nr. NG - 5146AT0264).
Very high temperature (+ 230°C) resistant, high strength anaerobic adhesive for locking and sealing thread connections and fitted parts. High viscosity and thixotropic effect allow larger tolerances. Highly resistant to corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.
DIN DVGW approved thread sealant for gas (according to DIN EN 751-1 Reg. Nr. NG – 5146BQ0496).
Showing 1–12 of 13 results
