東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
thixotropic
Return to Previous Page
Thixotropic permanent plastic sealant for use on threaded and flanged joints. It does not not harden in time and joints can be easily dismounted.
Seals against gas, LPG, water, gasoline, oils. Can be used in combination with preformed gaskets or alone for gap joints less than 0,1 mm. Resistant to vibrations, thermal shocks, keeps sealing properties within a temperature range of –50 / + 120°C. Prevents from surfaces corrosion.
Approved by Volkswagen for use in motor parts assembly (Ref. AKD 454300).
Anaerobic adhesive for sealing of metal thread pipe joints. Suitable for gas, LP gas, compressed air, gasoline and oil, industrial fluids, CFC, water and several chemicals. Low friction coefficient will assure easy assembly. Thixotropic property prevents migration from thread of the sealant before or during curing. It replaces P.T.F.E. tape and yarn. Cured product provides elastic film. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55 to +150°C. Easy dismantling is assured even after years.
Approvals for natural gas and LP gas in vapour state.
Europe: approved to EN751-1 by DIN-DVGW NG 5146AR0574 from -20°C to +150° C up to 2” pipe size.
Australia: approved by AGA n.5047 up to 5 bar and 2” pipe size.
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives elastic cured films. To seal against gases, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents sealant migration before or during curing. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
Multipurpose, thixotropic transparent and flexible structural adhesive, fast setting time. It is designed to be non-sagging for ease of use on vertical surfaces. Recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC). Not suitable for soft materials, polyethylene, polypropylene and PTFE. resistance to water, gasoline and oils.
Loxeal 4428 is a thixotropic, two-components epoxy resin. Especially developed for composites bonding, it provides excellent impact and vibration as well as high temperature resistance. It’s ease of mixing and applications allows its use on gap filling.
Anaerobic curing adhesive for sealing of metal thread joints only.
- Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association - Approval No. 5048) for working pressure up to 20 Bars
- Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E)
- WRAS listed for contact with wholesome (potable) water, approval number 1310513
- Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00)
- NSF registered in cat. P1(n. 141234) as acceptable for use as a sealant in and around food processing area
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives flexible cured films.
To seal against gases, water, LPG, hydrocarbons, oils and other chemicals.
Thixotropic property prevents migration of the sealant before or during curing.
Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
Very high temperature (+230° C) resistant, high strength anaerobic adhesive for locking and sealing thread connections and fitted parts. High viscosity and thixotropic effect allow larger tolerances. Highly resistant to corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.
DIN DVGW approved thread sealant for gas (according to DIN EN 751-1 Reg. Nr. NG - 5146AT0264).
Loxeal ISTANT 47 is a highly thixotropic ethyl cyanoacrylate adhesive, suitable for bonding of rubber and plastics together or on a metal substrate. Non-drip, non-sag gel, suitable for use on vertical surfaces. The high viscosity formulation and the delayed fixture time allow large gaps filling and parts repositioning. It provides proven temperature resistance up to +120°C with peaks up to +150°C for short times. NSF registered as acceptable for use as an instant adhesive (category P1) in and around food processing area. Registration No.154016.
Showing all 9 results
