東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
Thixotropic permanent plastic sealant for use on threaded and flanged joints. It does not not harden in time and joints can be easily dismounted.
Seals against gas, LPG, water, gasoline, oils. Can be used in combination with preformed gaskets or alone for gap joints less than 0,1 mm. Resistant to vibrations, thermal shocks, keeps sealing properties within a temperature range of –50 / + 120°C. Prevents from surfaces corrosion.
Approved by Volkswagen for use in motor parts assembly (Ref. AKD 454300).
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives elastic cured films. To seal against gases, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents sealant migration before or during curing. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
Anaerobic curing adhesive for sealing of metal thread joints only.
- Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association - Approval No. 5048) for working pressure up to 20 Bars
- Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E)
- WRAS listed for contact with wholesome (potable) water, approval number 1310513
- Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00)
- NSF registered in cat. P1(n. 141234) as acceptable for use as a sealant in and around food processing area
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives flexible cured films.
To seal against gases, water, LPG, hydrocarbons, oils and other chemicals.
Thixotropic property prevents migration of the sealant before or during curing.
Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
One component moisture curing acetic silicone sealant by reaction. Suitable for sealing gear boxes, pumps, motors and compressors flanges, hot fluid pipes. Provides an extremely flexible gasket between surfaces and resists to vibrations, thermal shocks, water, gas, LPG, oils and several chemicals. Keeps its sealing properties within temperatures of - 60° and + 250°C with peaks up to 300 °C. Sealed parts can be disassembled using normal tools.
Showing all 5 results
