東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
58-11
Anaerobic curing adhesive for sealing of metal thread joints only.
- Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association – Approval No. 5048) for working pressure up to 20 Bars
- Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E)
- WRAS listed for contact with wholesome (potable) water, approval number 1310513
- Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00)
- NSF registered in cat. P1(n. 141234) as acceptable for use as a sealant in and around food processing area
It replaces PTFE tape and yarn and gives instant sealing against moderate pressure. It seals against gas, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents migration of sealant from thread before or during curing. Shock and vibrations resistant, sealing properties unaffected over the temperature range from -55°C to +150°C.
Description
- High viscosity
- Anaerobic curing adhesive for sealing of metal thread joints only
- Replaces PTFE tape and yarn and gives instant sealing against moderate pressure
- It seals against gas, water, LPG, hydrocarbons, oils and other chemicals
- Thixotropic property prevents migration of sealant from thread before or during curing
- Shock and vibrations resistant, sealing properties unaffected over the temperature range from -55°C to +150°C
- Approved for Gas (DVGW, DIN-EN 751-1) and GLP (Australian Gas Association – Approval No. 5048) for working pressure up to 20 Bars
- Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E)
- WRAS listed for contact with wholesome (potable) water, approval number 1310513
- Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00)
- NSF registered in cat. P1(n. 141234) as acceptable for use as a sealant in and around food processing area
TDS: http://www.loxeal.com/wp-content/uploads/2017/09/TDS-58-11e.pdf
Additional information
| Class of Locking | |
|---|---|
| Viscosity | High |
| Viscosity @25°C mPa s | 20000-80000 |
| Colour | Yellow (Fluorescent) |
| Time of Curing | 1 – 2 Hours |
| Temperature Range °C (Lower) | -55 |
| Temperature Range °C (Higher) | 150 |