drinking water

Anaerobic curing adhesive for sealing of metal thread joints only.

Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association - Approval No. 5048) for working pressure up to 20 Bars
Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E)
WRAS listed for contact with wholesome (potable) water, approval number 1310513
Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00)
NSF registered in cat. P1(n. 141234) as acceptable for use as a sealant in and around food processing area

It replaces PTFE tape and yarn and gives instant sealing against moderate pressure. It seals against gas, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents migration of sealant from thread before or during curing. Shock and vibrations resistant, sealing properties unaffected over the temperature range from -55°C to +150°C.

85-86

Anaerobic adhesive for metals, high strength, to lock and seal threaded joints. Approved for use with drinking water according to TZW-DVGW approved for gas-tight threaded joints according to EN 751-1 (DIN DVGW approval no. 5146AR0573-NG). WRAS approved for contact with wholesome (potable) water; Approval N° 1505512. The product is certified (BAM-Berlin) for use as sealant in the presence of gaseous oxygen up to 20 bar at +60°C.Can be used on all metals, both in free or forced matings. Maintains the sealing properties up to +200°C. High resistance to thermal shock, vibration, water, gas, oils, fuels, refrigerant fluids and other chemicals.

Showing all 2 results

膠水專業方案

東原(香港)有限公司

辦公地址

聯絡資訊

L'ORIGIN

Categories

Filtered By:

Class of Locking

Viscosity

Curing Time

Temperature Range °C (Higher)

Temperature Range °C (Lower)

ENGINEERING ADHESIVE SOLUTIONS

L'ORIGIN

Address

Contact Info