anaerobic

Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives elastic cured films. To seal against gases, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents sealant migration before or during curing. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.

58-11

Anaerobic curing adhesive for sealing of metal thread joints only.

Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association - Approval No. 5048) for working pressure up to 20 Bars
Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E)
WRAS listed for contact with wholesome (potable) water, approval number 1310513
Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00)
NSF registered in cat. P1(n. 141234) as acceptable for use as a sealant in and around food processing area

It replaces PTFE tape and yarn and gives instant sealing against moderate pressure. It seals against gas, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents migration of sealant from thread before or during curing. Shock and vibrations resistant, sealing properties unaffected over the temperature range from -55°C to +150°C.

Activator 20

To be used with acrylic adhesives and with anaerobics. Apply the Adhesive on one part and the Activator on the other; assemble parts and wait few minutes to achieve fixing.

Showing all 3 results

膠水專業方案

東原(香港)有限公司

辦公地址

聯絡資訊

L'ORIGIN

Categories

Filtered By:

Class of Locking

Viscosity

Curing Time

Temperature Range °C (Higher)

Temperature Range °C (Lower)

ENGINEERING ADHESIVE SOLUTIONS

L'ORIGIN

Address

Contact Info