東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
Medium
Return to Previous Page
Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types requiring to be dismantled. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals.
Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types that require to be dismantled. Suitable to be used on oily surfaces. Highly resistant to heat, corrosion, vibrations, water, gas, oils, hydrocarand many chemicals. Proven unscrewing resistance at +200°C.
Approved as gas-tight sealant for threaded fittings according to the European norm EN 751-1 (DVGW nr. NG-5146AU0399 and GAZ DE FRANCE).
Approved for potable water (TZW - DVGW). It keeps sealing properties unchanged between -55°C/+200°C and up to +250°C for short times.
Anaerobic curing adhesive for sealing of metal thread joints only.
- Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association - Approval No. 5048) for working pressure up to 20 Bars
- Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E)
- WRAS listed for contact with wholesome (potable) water, approval number 1310513
- Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00)
- NSF registered in cat. P1(n. 141234) as acceptable for use as a sealant in and around food processing area
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives flexible cured films.
To seal against gases, water, LPG, hydrocarbons, oils and other chemicals.
Thixotropic property prevents migration of the sealant before or during curing.
Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
Showing all 4 results
