New Silicone Greases #9 and #4 have been improved with the certification NSF Class H1 for food contact. They are suitable for metal/plastic, metal/rubber, plastic/plastic and low duties metal/metal couplings. Odorless and tasteless, they can be used in contact with potable water. Do not allow growth fungus and moulds even in high humidity and temperature conditions. They are not flammable and they have good electrical insulation properties.
|Technical Characteristics:||Grease 4
|Appearance||White translucent paste||White Paste|
|Chemical Base||Silicone oil / PTFE||Silicone oil|
|Drop Point||Over 200°C|
|Penetration (ASTM D217-97)||NLGI 2-3|
|Dielectric Strength (CEI 243)||20 KV/mm|
|Temperature Range||-40°C / +200°C|
|Flash Point||Over 300°C|
|Solubility||Not soluble in water, mineral and vegetal oils, acid and alkaline solutions, salts solutions. Easily removed by organic solvents|
|Shelf Life||5 years|
|NSF-H1 Registration No.||141233||141569|
All sliding details of underwater guns must be lubricated with greases compounds that insure good sliding property when immersed in water even in extreme environmental conditions. Gun in the picture has been assembled using LOXEAL Grease 4
- ISO 9001:2008
- ISO 14001:2004
- More than 300 different grades of adhesives and sealants
- More than 20 chemical groupings according to reactions and strength
- Automated production with highly qualified person.
- Grades formulated in compliance to ROHS and REACh Regulations
- DVGW, WRAS. TZW , BAM approvals
- Greases and adhesives approved by NSF
- Adhesives for medical devices approved according to ISO 10993
- High production rotation to obtain best shelf-life results.
- Reserved dosing systems
- Highly qualified R&D and technical support
Please consult www.loxeal.com and www.lorigin.com.hk to have at your disposal all information about our adhesives. All formulations of ours grant high quality standards and offer the most different solutions for each application, including high temperature ones.
LOXEAL SRL – VIA MARCONATO 2 – 20811 CESANO MADERNO – ITALY – TEL. +39 (0) 362 5293.1
L’Origin (Hong Kong) Limited – Authorized Dealer of LOXEAL adhesive and sealant products in China and Hong Kong
– Unit 2, 7/F, Block B, Tuen Mun Industrial Centre, 2 San Ping Circuit, Tuen Mun, N.T., Hong Kong
– TEL. +852 2792 7838
– EMAIL. firstname.lastname@example.org