東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
Strong
Return to Previous Page
Low viscosity and high capillary action for locking and sealing threaded fasteners and close fittings parts after assembly, also to penetrate and seal metal porosity in moulds and in castings. Medium to high strength locking. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals.
High strength anaerobic adhesive for metals, highly resistant to oily surfaces. To be used on cylindrical fitting parts, either for slip fitted and for press fitting assemblies. Retaining compound for rotors, gears, bushes, bearings and pin hubs. Highly resistant to temperature, thermal shocks, vibrations, oils and hydrocarbons, refrigerants and many chemicals.
Fast curing high strength anaerobic adhesive for locking and sealing threads and retaining of cylindrical components.Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals. Approved for Gas (Gaz de France). Drinking water Certification. France: according to Eurofin Expertises Environmentales texts. (Dossier n° 14 CLP NY 005) product is in compliance with white lists - Ministère chargé de la santé DGS/VS4 n° 99/217 du 12 avril 1999 et DGS/VS4 n° 2000/232 du 27 avril 2000 (ACS)
Very fast curing, high strength anaerobic adhesive for locking threads and retaining od cylindrical components. Suitable for curing on passive metal surfaces, zinc chromated steel and stainless steel without activator. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals.
Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical components. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals. Approved as thread sealant with gaseous oxygen up to 20 bar at + 60°C (BAM Ref N° II.1/46 363).
Fast curing anaerobic adhesive for metals, with high mechanical resistance, designed to seal and lock threaded joints and cylindrical couplings.
Provides high resistance to temperature, vibration, chemical agents and aging. Highly resistant to unscrewing on yellow brass, nickel-plated and chromed fittings. Approved as threaded joints sealant for gas pipes under EN 751-1 (DIN DVGW nr. NG-5146BQ0134). Suitable for use with hot and cold potable water up to +85°C (WRAS-approved material BS6920:2000). Positively tested by NSF Laboratoires, Michigan, USA, according to ANSI 61 for potable water contact.Keeps the sealing property until the temperature of +200° C for short periods.
High strength anaerobic adhesive for locking and sealing of studs, nuts, bolts and threaded fasteners not requiring dismantling. It can be used on all metals, either in free or forced matings. It provides temperature resistance up to +200°C and high unscrewing strength. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbon many chemicals.
High strength anaerobic adhesive for locking and sealing of studs, nuts, bolts and threaded fasteners not requiring dismantling. It can be used on all metals either on free or forced matings. It provides high resistance to heat, corrosion, vibrations, water, gases, oils, hydrocarbon and many chemicals.
Anaerobic adhesive specific for high mechanical strength on yellow brass, to seal threaded joints and to fix cylindrical couplings. It keeps sealing properties up to +250°C. It’s highly resistant to thermal shocks, vibrations, chemical agents and aging. Its high viscosity allows a great handling tolerance.
Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical parts. It allows larger machining tolerances. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals.
Approved for gas - Gaz de France.
Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical parts. It allows larger machining tolerances. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals. Approved for gas - Gaz de France.
Anaerobic adhesive for metals, high strength, to lock and seal threaded joints. Approved for use with drinking water according to TZW-DVGW approved for gas-tight threaded joints according to EN 751-1 (DIN DVGW approval no. 5146AR0573-NG). WRAS approved for contact with wholesome (potable) water; Approval N° 1505512. The product is certified (BAM-Berlin) for use as sealant in the presence of gaseous oxygen up to 20 bar at +60°C.Can be used on all metals, both in free or forced matings. Maintains the sealing properties up to +200°C. High resistance to thermal shock, vibration, water, gas, oils, fuels, refrigerant fluids and other chemicals.
Showing 1–12 of 16 results
