東原(香港)有限公司
東原(香港)有限公司成立於2002年，並獲得國際知名的意大利品牌樂賽爾 LOXEAL授權為中國和香港區的代理，銷售樂賽爾旗下的優質黏合劑/工業用膠水和密封劑。
辦公地址
香港新界屯門新平街2號
屯門工業中心B座7字樓2室
聯絡資訊
電郵：[email protected]
電話：+852 2792-7838
+852 2792-4228
傳真：+852 2792-4138
Adhesive & Sealant
Return to Previous Page
Loxeal 4428 is a thixotropic, two-components epoxy resin. Especially developed for composites bonding, it provides excellent impact and vibration as well as high temperature resistance. It’s ease of mixing and applications allows its use on gap filling.
Loxeal 4429 is a toughened, semi-flexible, high-temperature resistant two-component epoxy resin. Especially developed for composites bonding, it provides good adhesion on various substrates as wood, metal, ceramics and many types of plastics. Designed to be nonsag for ease of use on vertical surfaces and in wide gaps. Mixing ratio 2:1 by volume. It provides a strong adhesion with high peel, cut and shear strength up to +120°C temperature with peaks at +140°C.
Loxeal 4807 is a two-components adhesive based on modified epoxy resin for flexible bonding and sealing applications. It fully adheres to plastics like PA, ABS, PC, PET, PMMA, PI, metals ceramics and composites. After full curing the adhesive looks soft and flexible. It provides high temperature resistance up to +120° with peaks to +150°C. Suitable for bonding and sealing glass fiber, metal frames in white appliances production (dishwashers, washing machine), and in automotive (lighting).
Self-levelling two-part adhesive based on modified epoxy resin for flexible bonding and sealing applications. It fully adheres to plastics like PA, ABS, PC, PET, PMMA, PI, metals, ceramics and composites. Temperature resistance up to +120°C with peaks to +150°C.
Two-part adhesive based on modified epoxy resin for flexible bonding and sealing applications. Specifically designed when self-extinguishing and thermal conductivity properties are required, it fully adheres to plastics like PA, ABS, PC, PET, PMMA, PI, metals, ceramics and composites. After full curing the adhesive looks tough and flexible and provides high peeling strength and temperature resistance up to +120°C with peaks to +150°C.
Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types requiring to be dismantled. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals.
Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types that require to be dismantled. Suitable to be used on oily surfaces. Highly resistant to heat, corrosion, vibrations, water, gas, oils, hydrocarand many chemicals. Proven unscrewing resistance at +200°C.
Approved as gas-tight sealant for threaded fittings according to the European norm EN 751-1 (DVGW nr. NG-5146AU0399 and GAZ DE FRANCE).
Approved for potable water (TZW - DVGW). It keeps sealing properties unchanged between -55°C/+200°C and up to +250°C for short times.
Anaerobic curing adhesive for sealing of metal thread joints only.
- Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association - Approval No. 5048) for working pressure up to 20 Bars
- Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E)
- WRAS listed for contact with wholesome (potable) water, approval number 1310513
- Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00)
- NSF registered in cat. P1(n. 141234) as acceptable for use as a sealant in and around food processing area
Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives flexible cured films.
To seal against gases, water, LPG, hydrocarbons, oils and other chemicals.
Thixotropic property prevents migration of the sealant before or during curing.
Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.
One component moisture curing acetic silicone sealant by reaction. Suitable for sealing gear boxes, pumps, motors and compressors flanges, hot fluid pipes. Provides an extremely flexible gasket between surfaces and resists to vibrations, thermal shocks, water, gas, LPG, oils and several chemicals. Keeps its sealing properties within temperatures of - 60° and + 250°C with peaks up to 300 °C. Sealed parts can be disassembled using normal tools.
One component sealing adhesive based on MS polymers. It’s odourless, neutral and free of isocyanates. It cures with moisture producing a tough gum-like seal. Useful to seal glass structures and surfaces, glaze, glazed metal panels, epoxy, polystyrene foam, PVC, steel, anodised aluminium and machined wood. Not suitable for PE, PP, PTFE, bituminous surfaces applications, for underwater application and expansion joints. Not to be painted with alkyl resin colours.
Low viscosity and high capillary action for locking and sealing threaded fasteners and close fittings parts after assembly, also to penetrate and seal metal porosity in moulds and in castings. Medium to high strength locking. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals.
Showing 13–24 of 72 results
